USAfixTM - Repair Guide (RG) - Master Email RG
- Check/Replace the Charger Plug and Safety Switch (Wet Cell Conversion)
 Level of Difficulty - Low  Estimated Completion Time - 5 minutes
TASKI - SWINGO 1650

Tools Required
Tool 
Torx T30

Parts Required
PartDescriptionPriceAvailablePurchase
192-8784 Switch lever $21.98 Back Order Qty:
192-9941 Wire harness with charger switch $68.72 Back Order Qty:
991-2103 50amp charger plug SB50 with pins (red) $6.79 Back Order Qty:


Step Procedure & Parts & Tools
1 TURN THE MACHINE OFF

2 REMOVE THE BACK PANEL BY LOOSENING THE 6 T30 SCREWS.
Torx T30

3 VISUALLY INSPECT THE CHARGER PLUG TO CHECK FOR DAMAGE SUCH AS BENT PINS, CRACKED PLASTIC, LOOSE CABLES. IF NO DAMAGE, RECONNECT THE CHARGER PLUG.

4 IT MAY BE ADVANTAGEOUS TO SWITCH TO A RED PLUG. THIS HELPS WITH USING OFF BOARD CHARGERS BECAUSE "RED" IS THE STANDARD COLOR FOR 24V MACHINES.

PartDescriptionPriceQty
991-2103 50amp charger plug SB50 with pins (red) $6.79 Qty:  
5 IF UNIT HAS WET CELL BATTERIES, THERE WILL BE A SAFETY SWITCH UNDER THE CHARGER PLUG. IF IT IS DAMAGED, THIS COULD PREVENT THE MACHINE FROM TURNING ON.

PartDescriptionPriceQty
192-8784 Switch lever $21.98 Qty:  
192-9941 Wire harness with charger switch $68.72 Qty: